YouTube video instructions coming soon!

Fishing Pole Holder Ground Mount Option

Chair Mount Instructions


Place U-bolt (H) through large mounting hole (I) and around tubular frame of chair; then secure using mounting plate (J) and wing nuts (F)- wing nuts not pictured.

Ground Mounting Instructions

Place mounting plate (J) flat on ground with holding tube (A) in vertical position, place mounting spike (C) into large mounting hole (I), pound in with hammer until flush. Rotate tube (A) to desired angle and insert fishing pole handle.



Boat/Railing Mount Instructions


If a flat surface is available, follow option 1 or 2 of flat surface mounting instructions above. (pictured to left)


If mounting to a railing, use U-bolt (H) and place through large mounting hole (I) and around rail; then secure using mounting plate (J) and wing nuts (F).


Fishing Pole Holder Ground Mount plus Accessory Kit.


A- holding tube

B- small mounting holes

C - mounting spike

D- 1" long wood screws

E-  5/16" bolt and lock washer

F- wing nuts

G- securing plate for U-bolt

H- U-bolt

I- large mounting hole

​J- mounting plate

​K- bolt and wing nut to adjust holding tube

Tackle Box Mount Instructions


Drill a 3/8" hole through the end of the tackle box, then use 5/16" bolt and lock washer (E) through large mounting hole (I) to secure mounting plate (J) to tackle box, placing the lock washer on the bolt on the inside of the tackle box.


Flat Surface/Table Mount Instructions.


Option1: Drill a 3/8" hole through the surface mounting to, then use 5/16" bolt and lock washer (E) through large mounting hole (I) to secure mounting plate (J) to surface, placing the lock washer on the bolt on the underside of the table/surface.


Option 2: Use the four 1" wood screws (D) through the four small mounting holes (B) of the mounting plate (J) and screw into the surface- no pre-drilling required.